Steps in building your 10ft. x 12ft. Greenhouse.
All our kits are fittings only.
Step 1 Check with your local fencing companies to see price and availability of 1-3/8" 17-18 gauge chain link top rail tubing.
(Home Depot, Lowes, etc.) You will need 11 pieces of tubing, each (21ft long).
Step 2 Purchase our 10ft. x 12ft. fitting kit. Our Fittings are the KEY to EASY ASSEMBLY of your greenhouse!
Step 3 Purchase our 10ft. "DIY Bender" designed for 1-3/8" tubing.
Step 4 Purchase greenhouse plastic on internet. We use "4 Year 6mil. greenhouse film" "GreenTek" is a Quality Brand.
Step 5 Cut tubing to the correct lengths as indicated in our instruction photos on this page. IMPORTANT: Cut and assemble the base and the arches first, then install the door opening and window opening by measuring the height of your arch, the measurements given in the instruction photos on the door and the window are simply a guide, they may vary on your greenhouse.
Step 6 We recommend that you copy the four instruction photos from this page to your computer.
Bend your four 20ft. arches and assemble your greenhouse frame. (Review step 5) Attach your plastic with the pvc fittings you
built from our instructional photos.
Step 7 Plant & become Self-Sufficient!
With the increase of greenhouse sales, building and selling greenhouses has the potential
for an excellent home based business!
To construct this 10 ft. x 12 ft. quonset style greenhouse with 3 purlins,
the following fittings are what you will receive in this kit
• 20 - T-Fittings
• 4 - Corner Fittings
• 6 - Cross Fittings
• 4 - Angled T Fittings
• 4 - 90 degree Elbow Fittings
• 2 - Door Hinges
• 1 - Door Latch
• 1 - Door Cable with clamps
Also INCLUDES Self-Tapping Screws!
10ft x 16ft kit includes the following additional fittings: 2- T's and 3 cross fittings.
10ft x 20ft kit includes the following additional fittings: 4-T's and 6 cross fittings.
10ft x 24ft kit includes the following additional fittings: 6-T's and 9 cross fittings.
All fittings have a solid welded steel construction with a Baked on Powder Coated, stainless steel color finish!
These fittings were designed by Shane Dodge and manufactured at colorado metal worx, all rights reserved ©2015