Included in the kit: Complete Bumper hitch attachment and one bender (your selection of benders).

This Truck Hitch "DIY GREEN BENDER" Holder will allow you to bend tubing on the go! Any where your truck goes you will be seconds away from setting up the "DIY green bender" and bending your tubing arches for a greenhouse frame, Chicken tractor, row covers, etc.
Built strong with welded construction and a baked on green epoxy powder coat finish for years of reliable use!
As the second picture shows, the holder sets away from the truck, giving you lots of room to work!
This Truck Hitch Holder is also two tools in one! As shown in the pictures above the smaller holder section can be removed and used in the rack holes of your truck bed. ***IMPORTANT*** when using this holder in the rack holes of your truck bed we recommend that you ONLY bend the 1/2" emt tubing this way and at your own discretion, some folks have nicer trucks than others and we don't want to damage the nice ones!

This Bumper Hitch attachment Works with all of our "DIY GREEN BENDERS".

THE BENDER IN THE PICTURE IS INCLUDED. Choose the size of bender from the drop down menu.

These Benders come in different sizes. 3ft., 4ft., 6ft., 8ft., 10ft., 12ft., 14ft., 16ft., 20ft., 24ft., 30ft., and 40ft.

Each size represents the width of the arch you will achieve after bending your tubing with our "DIY GREEN BENDER"

You can build quonset style greenhouses and shelters from 1-3/8" top rail chain link tubing, which only works with the 8,10,12,14,16 or 20.

You can build row covers using EMT, (EMT stands for electrical metallic tubing which is a galvanized
tubing used in the electrical industry). The 3,4 and 6ft benders will work with 1/2" emt or 3/4" emt.

THE TRUCK HITCH "DIY GREEN BENDER" HOLDER IS DESIGNED BY COLORADO METAL WORX AND IS MANUFACTURED BY COLORADO METAL WORX, COLORADO METAL WORX IS THE EXCLUSIVE OWNER OF THIS DESIGN 2008-2016.